BFT VEGA - VEGA ULTRA Manual Del Usuario página 41

Logic De nition
Con gura-
tion of EXPO2
output
on input-output
EXPO2
expansion
board
6-7
TRAFFIC LIGHT
Tra c light
pre- ashing
PREFLASHING
TRAFFIC LIGHT
Steadily lit red
RED LAMP
light
ALWAYS ON
*
Only active on FW > 1.05 - 2.05 - 3,05
**
Active only if the output is con gured as Monostable Radio Channel, Courtesy Light, Zone Light, Stair Light, Bistable Radio Channel or Timed Radio Channel.
CH logic= 0 - Control con gured as Start E. Operation according to STEP-BY-STEP MOV. logic. External start for tra c light control.
CH logic= 1 - Control con gured as Start I. Operation according to STEP-BY-STEP MOV. logic. Internal start for tra c light control.
CH logic= 2 - Control con gured as Open.
The command causes the leaves to open.
CH logic= 3 - Control con gured as Closed.
The command causes the leaves to close.
CH logic= 4 - Control con gured as Ped.
The command causes the leaf to open to the pedestrian (partial) opening position. Operation according to STEP-BY-STEP. logic
Logica CH= 5- Control con gured as STOP.
The command performs a STOP
CH logic= 6 - Control con gured as AUX0. (**)
The control activates the AUX0 output
CH logic= 7 - Not used
CH logic= 8 - Not used
CH logic= 9 - Control con gured as AUX3. (**)
The control activates the AUX3 output
CH logic= 10 - Control con gured as EXPO1. (**)
The control activates the EXPO1 output
CH logic= 11 - Control con gured as EXPO2. (**)
The control activates the EXPO2 output
(**) Active only if the output is con gured as Monostable Radio Channel, Courtesy Light, Zone Light, Stair Light, Bistable Radio Channel or Timed Radio Channel.
TABLE "C" RADIO MENU RADIO
Logic Description
Add 1ch Key
add 1ch
associates the desired key with the 1nd radio channel command.
Add 2ch Key
add 2ch
associates the desired key with the 2nd radio channel command.
Add 3ch Key
add 3ch
associates the desired key with the 3nd radio channel command.
Add 4ch Key
add 4ch
associates the desired key with the 4nd radio channel command.
Erase List
WARNING! Erases all memorized transmitters from the receiver's memory.
erase 64
Eliminates individual radio control
Removes a radio control (if clone or replay is disabled) To select the radio control to be deleted, enter the position or press a button on the radio
erase 1
control to be deleted (the position is displayed)
Read receiver code
Displays receiver code required for cloning transmitters.
42
- VEGA - VEGA ULTRA
INSTALLATION MANUAL
Cross
out
Default
setting
used
5 Output con gured as Alarm.
6 Output con gured as Flashing light.
7 Output con gured as Latch.
8 Output con gured as Magnetic lock.
9 Output con gured as Maintenance.
11 10 Output con gured as Flashing Light and Maintenance.
11 Output con gured as Tra c Light control with TLB board.
12 Output con gured as anti-tampering
13 Output con gured as Gate Status
14 Output con gured as Bistable Radio Channel
15 Output con gured as timed Radio Channel
0 Pre- ashing switched o .
0
1 Red lights ash, for 3 seconds, at start of operation.
0 Red lights o when gate closed.
0
1 Red lights on when gate closed.
Radio channel control con guration
Optional extras