Precor SPINNER CHRONO POWER Guía De Inicio página 49

The Spinner® Chrono™ console displays power level, interval tracking, simultaneous current and average data for workout and summary, and lets you pair
your smartphone to online Bluetooth® applications.
Attach the console to the bike
To attach the console:
1. Plug the data cable into the back of the console.
2. Place the console on top of the handlebars (Figure 1).
3. Position the console back plate under the handlebars making
sure not to pinch the cable.
4. Secure the console using four socket head screws through the
back plate and into the console case (Figure 2).
Important The USB port on the back of the console is for updating software
and use by customer service. DO NOT use it to charge phones.
Activate the console
Precor equipment is either self-powered or externally powered using an optional power adapter. To activate self-powered
equipment, begin pedaling.
An optional AC power adapter provides sustained power to the equipment or recharges the internal battery. To purchase the
power adapter, contact Precor Customer Support.
Set up the console
You can use the console with default settings or you can customize it two ways:
• Save time by using a formatted USB stick with the defined settings to set up multiple consoles with the same settings.
• Manually define club settings and custom parameters on each console.
Setup/Service mode
Use the console Setup/Service mode to configure settings in ways that benefit exercisers.
Note The information provided in this section is intended for system administrators and Precor service technicians.
DO NOT share it with exercisers or non-administrative staff.
In the Setup/Service mode, the console buttons function differently.
Button Function
Blue (Focus) Move through settings within each category
Green (Interval) Return to previous category
White (Pairing) Select displayed option, then advance to next
category
Settings in the Service/Setup Mode
For detailed information on each setting, see the Indoor Cycling product page at Precor.com.
Club Parameters Settings
Use Club Settings to choose the type of information you want exercisers to see on the console while working out.
Note Many of these settings can be defined on a formatted USB stick, which can then be used to set up multiple consoles with identical settings.
Setting Setting options (default in bold)
UNITS MPH, KPH
BACKLIGHT 3, 1, 2
DISP MODE SPINPOWER, CAL, KJ
ASL SETUP ON, OFF, YELLOW ON, BLUE ON (Active Status Light)
BT PAIRING SHORT, ON, OFF
MAJOR INSP KEEP, CLEAR (used after bike maintenance)
Informational Settings
These settings contain the information required when you contact Precor Customer Support including serial numbers, software program
versions, odometer and error log summary, and model numbers. It is possible to record system information and the error log on a properly
formatted USB stick.
Service Tests
These test help you troubleshoot systems including torque, WATTS, RPM, battery and generator voltage and amps, and display elements.
For complete console operating instructions and troubleshooting, visit us
Spinner® Chrono™ Console Getting Started Guide | P/N 304563-101 rev C, ENU
©2017 Precor Incorporated | November 2017
SPINNER® CHRONO™ POWER CONSOLE
GETTING STARTED GUIDE
To enter the Setup/Service mode:
1.
2. Press and HOLD down the blue button while doing the following at the
3. Release the blue button.
Setting
CLEAR ERROR
DEVICE ID
LANGUAGE
SETUP
RESET
PROGRAM
Figure 1
Begin pedaling. The Welcome screen displays.
Note You can only enter the Setup mode from the Welcome screen.
same time:
- Press and release the white button.
- Press and release the green button.
- Press and release the green button again.
- Press and release the white button.
Setting options (default in bold)
KEEP, CLEAR
Default ID # (Can be customized using the blue button)
ENGLISH, SPANISH, FRENCH, GERMAN
NO, YES (used with USB stick during setup)
NO, YES (clears all user settings from console and returns the
system to factory defaults)
NO, YES (used with USB stick during software upgrades)
at www.precor.com.
Figure 2