Operational Information - Precor SPINNER CHRONO POWER Guía De Inicio

Informational Settings
The Information Settings contain the information required when you contact Precor Customer Support
including serial numbers, software program versions, odometer and error log summary, and model numbers.
Note It is possible to record system information and the error log on a properly formatted USB stick.
Setting Description
CONS SN Console serial number that is printed on a label on the back of the console
LPCA SN Serial number for the printed circuit board in the base, which is also the base equipment serial number
TOP SW Versions of CONS and GEM software are in console
CONS SW One of the two software programs in console
GEM SW One of the two software programs in console
LPCA SW Software part number for the printed circuit board in the base
ODOMETER Total distance (in miles) on bike
HOURS Total hours of use on bike
WORKOUTS Total number of workouts on bike
• If there are no errors, then there will be nothing below the title.
• If there are errors, the five most recent errors appear. Press the blue key to navigate through the error list.
ERROR LOG
MODEL TYPE Bike model number

Operational Information

Setting Description
Torque Reported strain gauge force (in-lb)
WATTS
Reported power = Total torque x RPM (WATTS)
RPM Revolutions per minute (pedal rate)
Service Tests
Perform tests to help you troubleshoot
amps, and display elements.
Press the white button to move from one test to the next.
Setting Description
DISP TEST Tests the display to make sure all elements are working. Select YES to test the display. No is the default.
BAT VOLT Battery voltage: While you pedal or if you have an external charger installed, the voltage will appear high
because the battery is charging. When you stop pedaling, you will see the actual (true) voltage.
BAT AMP Battery amp: Battery current being discharged.
GEN VOLT Generator voltage: Speed of pedaling affects the voltage number.
GEN AMP Generator amp: Current being supplied by generator.
USB LOGS Data from this setting is stored in Log directory.
systems including torque, WATTS, RPM, battery and generator voltage and