Range Of Application; Typical Applications; Scope Of Supply - SCANMASKIN SCAN COMBIFLEX 650 Manual

SCAN COMBIFLEX 650
1.5

Range of application

SC650 is exclusively designed to process horizontal surfaces. SC650 must not be used
for other purposes than stated in this user guide. The manufacturer will not be lia-
ble for damage or injury resulting from incorrect usage of SC650. Failure to follow
the directions in this user guide will void the warranty.

Typical applications

• Removal of old coatings, carpets, putty from hard surfaces
• Removal of undulated concrete surfaces
• Preparation of the surface for coatings
• Polishing of the surface
• Removal of coating defects
• Removal of glue residues
1.6

Scope of supply

The following parts are included with the standard SC-650 grinding machine:
• Key to electrical cabinet
• User guide
If the machine has got a water connection, the counter part for the connection will be included
and fit in the water connection near the handle.
Machines sold outside of Europe will be either equipped with a local standard connector for
the power inlet or the mating connector will be included and fitted at the main power inlet.
Read "2.6 Electrical safety" before connecting any included connectors.
www.scanmaskin.com
ENGLISH
45