Safety Regulations; Legend; Safety Precautions - SCANMASKIN SCAN COMBIFLEX 650 Manual

SCAN COMBIFLEX 650
2.

Safety Regulations

Read this entire chapter carefully! Failure to comply with safety regulations may result in
serious injuries or damages.
2.1

Legend

Notation regarding safety
Notation regarding electrical safety
Notation regarding safety during transport
Tipping hazard
See reference
2.2

Safety precautions

Any machine, if it is not used according the regulations, may be hazardous for operat-
ing, setting-up and service personnel. The operating authority is responsible for
compliance with the safety regulations during operation and maintenance, and for
the use of safety devices supplied with the machine, as well as the provision of ap-
propriate additional safety devices!
Eye and ear protection must be worn at all times.
Never operate the machine when it's not in its upright position.
Make sure there is no debris in the work area.
Check the work area for screws or other hard objects in the concrete. Don't use the
chine if there are any foreign objects stuck into the surface. Such objects must be removed pri-
or to operation of machine.
Read "2.3Organizational measures" and "2.5Safety regarding operation of machine"
thoroughly before operation!
www.scanmaskin.com
ENGLISH
ma-
47