Specifications; Electrical Specifications - SCANMASKIN SCAN COMBIFLEX 650 Manual

1.

Specifications

The SC-650 is available with different power inputs and some options regarding wet grinding.
This is described in the different sections later on in this chapter.
1.1

Electrical specifications

To find the specifications that apply to your machine, check the information plate on the electri-
cal cabinet door.
Never connect the SC-650 to any other voltage or number of phases than de-
scribed in this specification.
The power source must be fused according to "External fuse" in this specification;
also the cables used must be marked and rated in accordance with the fuse used.
Failure to comply with the correct fuses may cause fire or injuries.
Power choice
1
Power
Current
Voltage
Frequency
External fuse
3
Power inlet
4
Partnumber
Table 11 Electrical specifications
All models are CE-marked.
If using a generator see "2.6.2Using a generator"
1 This refers to different power choices. Note that a SC-650 made for one choice of power must be used
with that particular choice.
2 Standard
3 Maximum current for the fuses used in the power source (i.e. the distribution box).
4 This is the standard inlet used. Machines sold outside of EU will be shipped either with a local stan-
dard inlet or an adapter.
42
400 V 3~ 230 V 3~
2
7.5 kW (10 hp) 7.5 kW (10 hp)
15.3 A 27 A
380 – 400 V 3~ 200 – 240 V 3~
50/60 Hz ± 5% 50/60 Hz ± 5%
16 A 32 A
IEC 60309 IEC 60309 3P+E
3P+N+E 400V 250V 32A
16A
560040
230 V 1~
4 kW (5 hp)
29 A
200 – 240 V 1~
50/60 Hz ± 5%
32 A
IEC 60309 2P+E
250V 32A
560019
www.scanmaskin.com