Tools; Range Of Application - SCANMASKIN 28 WS Manual

SCANMASKIN 32 WORLD SERIES

Tools

1.4
The machine must be equipped with tools approved by Scanmaskin Sweden AB before op-
eration.
Failure to follow the directions in this Manual will void the warranty
See "Grinding guide" for information about available tools and "4.14 Changing tools" for
information about how to change the tools.
The tools are fitted using the Scan-On system for easy fitting.
Figure 12 Scan-On plate with tools fitted.

Range of application

1.5
SCANMASKIN 28 WS is exclusively designed to process horizontal surfaces. SCANMASKIN
28 WS must not be used for other purposes than stated in this Manual. The manufacturer will
not be liable for damage or injury resulting from incorrect usage of SCANMASKIN 28 WS.
Failure to follow the directions in this Manual will void the warranty.
Typical applications
• Removal of old coatings, carpets, putty from hard surfaces
• Removal of undulated concrete surfaces
• Preparation of the surface for coatings
• Polishing of the surface
• Removal of coating defects
• Removal of glue residues
www.scanmaskin.com
10.
ENGLISH
77