Tools; Range Of Application; Typical Applications - SCANMASKIN World Serie Manual

SCANMASKIN 32 WORLD SERIES
1.4

Tools

The machine must be equipped with tools approved by Scanmaskin Sweden AB before oper-
ation.
Failure to follow the directions in this Manual will void the warranty
See "Grinding guide" for information about available tools and "4.14 Changing tools" for
information about how to change the tools.
The tools are fitted using the Scan-On system for easy fitting.
Figure 12
Scan-On plate with tools fitted.
1.5

Range of application

SCANMASKIN 32 WS is exclusively designed to process horizontal surfaces. SCANMASKIN 32
WS must not be used for other purposes than stated in this Manual. The manufacturer will not
be liable for damage or injury resulting from incorrect usage of SCANMASKIN 32 WS. Failure
to follow the directions in this Manual will void the warranty.

Typical applications

• Removal of old coatings, carpets, putty from hard surfaces
• Removal of undulated concrete surfaces
• Preparation of the surface for coatings
• Polishing of the surface
• Removal of coating defects
• Removal of glue residues
www.scanmaskin.com
10.
ENGLISH
75