Start And Stop; Operating; When Taking A Break; Maintenance - Chicago Pneumatic CP 0111 CHLA Instrucciones De Seguridad Y De Funcionamiento

CP 0111 CHLA, CP 0111 CHIT

Start and stop

Model Start
CP 0111
CHLA
CP 0111
CHIT
Start the machine by sqeezing the start and stop
♦
device while firmly holding the handle.
Stop the machine by releasing the trigger. The
♦
start and stop device returns automatically to the
stop position.

Operating

Starting a cut
Stand in a stable position with your feet well away
♦
from the inserted tool.
Press the machine against the working surface
♦
before you start.
The working speed of the machine is controlled
♦
via the trigger.
♦ Start collaring at such a distance from the edge
that the machine is capable of breaking the
material without leverage.
9800 0809 90
Stop
Safety and operating instructions
♦ Never break off too large pieces. Adjust the
breaking distance (A) so that the inserted tool
does not get stuck.
Breaking
♦ Let the machine do the work; do not press too
hard.
Avoid working in extremely hard materials for
♦
example granite and reinforcing iron (re-bar)
which would cause substantial vibrations.
♦ Any form of idling, operating without insertion
tool or operating with an uplifted machine must
be avoided.
♦ When the machine is lifted, the start and stop
device must not be activated.
Check regularly that the machine is well
♦
lubricated.

When taking a break

During all breaks you must place the machine in
♦
such a way that there is no risk for it to be
unintentionally started.
In the event of a longer break or when leaving the
♦
workplace: Switch off the compressed air supply
and then bleed the machine by activating the start
and stop device.

Maintenance

Regular maintenance is a basic requirement for the
continued safe and efficient use of the machine.
Follow the operating instructions carefully.
13