Storage, Precautions; Maintenance, Precautions - Chicago Pneumatic CP 0111 CHLA Instrucciones De Seguridad Y De Funcionamiento

CP 0111 CHLA, CP 0111 CHIT
See the "Noise and vibration declaration statement"
for the machine, including the declared vibration
values and "Additional vibration information". This
information can be found at the end of these safety
and operation instructions.
Comply with the recommended air-pressure when
♦
operating the machine. Either higher or lower
air-pressure has the potential of resulting in higher
levels of vibration.
DANGER Electrical hazard
The machine is not electrically insulated. If the
machine comes into contact with electricity, serious
injuries or death may result.
Never operate the machine near any electric wire
►
or other source of electricity.
Make sure that there are no concealed wires or
►
other sources of electricity in the working area.
WARNING Concealed object hazard
During operating, concealed wires and pipes
constitute a danger that can result in serious injury.
► Check the composition of the material before
operating.
Watch out for concealed cables and pipes e.g.
►
electricity, telephone, water, gas and sewage lines
etc.
► If the inserted tool seems to have hit a concealed
object, switch off the machine immediately.
Make sure that there is no danger berfore
►
continuing.
WARNING Involuntary start
Involuntary start of the machine may cause injury.
Keep your hands away from the start and stop
►
device until you are ready to start the machine.
Learn how the machine is switched off in the event
►
of an emergency.
► Release the start and stop device immediately in
all cases of power supply interruption.
Whenever fitting/removing the insertion tool
►
switch off the air supply and disconnect the
machine from the power source. Bleed the
machine by pressing the start and stop device.
WARNING Noise hazard
High sound levels may cause permanent hearing
loss.
► Use hearing protection in accordance with
occupational health and safety regulations.
9800 0809 90
Safety and operating instructions

Storage, precautions

♦ Keep the machine and tools in a safe place, out
of the reach of children and locked up.

Maintenance, precautions

WARNING Machine modification
Any machine modification may result in bodiliy
injuries to yourself or others.
Never modify the machine.
►
Always use original parts and accessories
►
approved by Chicago Pneumatic.
Change damaged parts immediately.
►
► Replace worn components in good time.
CAUTION Hot insertion tool
The tip of the insertion tool becomes hot when used.
Touching it can lead to burns.
► Never touch a hot insertion tool.
Wait until the insertion tool has cooled down
►
before carrying out maintenance work.
9