Overview; Design And Function; Choosing The Correct Breaker For A Task; Main Parts - Chicago Pneumatic CP 0112 Instrucciones De Seguridad Y De Funcionamiento

Safety and operating instructions

Overview

To reduce the risk of serious injury or death
to yourself or others, read the Safety
instructions section found on the previous
pages of this manual before operating the
machine.

Design and function

The CP 0112 and CP 0112 S handheld pneumatic
breakers are designed for light- to medium
construction and plant maintenance work.
CP 0112 EX has an extended handle for trench work.
CP 0112, CP 0112 S and CP 0112 EX are fitted with
a T-handle and shall be used vertically.
No other use is permitted.
To choose the correct insertion tool, see the spare
parts list.
Choosing the correct
breaker for a task
It is important to choose the correct size of breaker
for the work to be performed.
A breaker that is too small means that the work will
take longer.
A breaker that is too large means that there must be
frequent repositioning, which is unnecessarily tiring
for the operator.
A simple rule for choosing the correct size of breaker
is that a normal sized piece of broken material should
be removed from the workpiece within 10–20
seconds operation.
> If it takes less than 10 seconds a smaller breaker
should be selected.
> If it takes more than 20 seconds a larger breaker
should be selected.
12
CP 0112, CP 0112 S, CP 0112 EX

Main parts

CP 0112 S
CP 0112
A. Trigger E.
B. Handle F.
C. Oiler G.
D. Air inlet H.
9800 0798 90e | Original instructions
A
B
C
D
G
E
F
B
A
A
B
C
C
D
D
H
E
F
CP 0112 EX
Cylinder
Latch (tool retainer)
Muffler
Extended handle