Before Using The Machine - Chicago Pneumatic CP 0003 Instrucciones De Seguridad Y De Funcionamiento

CP 0003, CP 0004 Safety and operating instructions

Before using the machine

Before using the machine
NOTICE
Never start using the machine without assembling it according to the following instructions,
otherwise you will damage the machine.
CAUTION Parts can come loose
The machine is delivered in two parts from factory. Parts from the machine can come loose, fly away and injure
you or other persons if the machine is not properly assembled before use.
The following steps must therefore be performed before you start using the machine.
►
2
1 1
3
4
90Nm
90Nm
1. Screw the nut onto the pipe as far as the threads allow. Make sure that the nut does not interrupt step 2.
2. Assemble the pipe by screwing it clockwise into the cylinderhead. Apply 90 Nm torque when tightening.
3. Screw the nut clockwise against the cylinderhead.
4. Apply 90 Nm torque when tightening the nut.
9800 0557 90c | Original instructions 11