Before Use; Filling With Water - Mellerware MSI-3001 Manual De Instrucciones

MANUAL STEAM IRON MSI-3001 CRUCES.pdf
--Do not allow the connection cable to hang freely or
to come into contact with the appliance's hot
surfaces.
--Check the condition of the mains cable. Damaged
or twisted cables increase the risk of electric shock.
--Do not touch the plug with wet hands.
--Do not use the appliance if the cable or plug is
damaged.
--If any of the appliance casings breaks, immediate-
ly disconnect the appliance from the mains to
prevent the possibility of an electric shock.
--Do not touch any heated parts, as this may cause
serious burns.
Use and care:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if the accessories
attached to it are defective. Replace them immedia-
tely.
- Do not use the appliance if the on/off switch does
not work.
- Use the appliance handle/s, to lift or move it.
C
- Do not use the appliance at an angle or turn it
M
over.
- Do not turn the appliance over while it is in use or
Y
connected to the mains.
CM - To keep the non-stick coating in good condition,
do not use metal or pointed utensils on it.
MY
- Respect the MAX level indicator. (Fig.1)
- Unplug the appliance from the mains when not in
CY
use and before undertaking any cleaning task.
CMY
- This appliance is for household use only, not
professional or industrial use.
K
- Store this appliance out of reach of children and/or
those with reduced physical, sensorial or mental
abilities or who are unfamiliar with its use
- Do not store or transport the appliance if it is still
hot.
- If the iron is left in its housing at maximum tempe-
rature for prolonged periods, this may cause
discolouration, which will not affect appliance
operation in any way.
- To ensure that the iron functions correctly, keep
the soleplate scratch free and do not use it on metal
objects (e.g. the ironing board, buttons, zips...)
- The use of distilled water is recommended,
especially if the water in your area contains any
type of silt or is "hard" (contains calcium or magne-
sium).
- Check that the lid is closed properly before
switching the appliance on.
- Never leave the appliance connected and unatten-
ded if is not in use. This saves energy and prolongs
the life of the appliance.
- Never rest the appliance on a surface while in use.
5 3/9/18 8:44
- Do not use the appliance on any part of the body
of a person or animal.
- Do not use the appliance on pets or animals.
- Do not use the appliance to dry garments of any
kind.
- Turning the thermostat control to the minimum
(MIN) setting does not guarantee that the iron is
switched off completely.
SERVICE:
- Make sure that the appliance is serviced only by
specialist personnel, and that only original spare
parts or accessories are used to replace existing
parts/accessories.
- Misuse or failure to follow the instructions may be
dangerous and renders the manufacturer's guaran-
tee null and void..
DESCRIPTION
A Spray button
B Steam blast button
C Steam flow control
D Auto-cleaning button
E Temperature regulator
F Pilot light
G Filling spout
H Spray nozzle
I Soleplate
Read these instructions carefully before switching
the appliance and keep them for future reference.
Failure to follow and observe these instructions may
result in an accident.
INSTRUCTIONS FOR USE

BEFORE USE:

- Peel off appliance's protective film.
- Make sure that all the product's packaging has
been removed.
- Some parts of the appliance have been lightly
greased, consequently, the appliance may give off
a light smoke the first time it is used. After a short
time, this smoke will disappear.
- Prepare the appliance according to the function
you wish to use:

FILLING WITH WATER:

- It is essential to have filled the tank with water to
be able to work with steam.
- Open the lid on the filling spout.
- Fill the tank, taking care to respect the MAX level
(Fig. 1)
- Close the filling spout lid.