Updating The Firmware; Disposal; Guarantee - DAB E.Sybox mini 3 Instrucciones Para La Instalación Y El Mantenimiento

1. No water.
2. Pump not primed.
The display Red: on
3. Setpoint not
shows White: on
reachable with the
BL Blue: off
set RM value
The display Red: on
1. Faulty pressure
shows White: on
sensor.
BP1 Blue: off
The display Red: on
shows White: on 1. Faulty pressure
BP2 Blue: off sensor.
1. Excessive absorp-
The display Red: on
tion.
shows White: on
2. Pump blocked.
OC Blue: off
1. Supply voltage
The display Red: on
too low.
shows White: on
2. Excessive drop in
PB Blue: off
voltage on the line.
1-2. Prime the pump and check
whether there is air in the pipe.
Check whether the suction or any
filters are blocked.
3. Set a RM value that allows the
setpoint to be reached.
1. Contact the assistance centre.
1. Contact the assistance centre.
1. Fluid too dense. Do not use
the pump for fluids other than
water.
2. Contact the assistance centre.
1. Check the presence of the
correct supply voltage.
2. Check the section of the power
supply cables.

11 - UPDATING THE FIRMWARE

The firmware can be updated with the D-Connect Box via wireless com-
munication. To perform the update, refer to the D-Connect Box manual.

12 - DISPOSAL

This product or its parts must be disposed of in an environment-friendly
manner and in compliance with the local regulations concerning the envi-
ronment; use public or private local waste collection systems.

13 - GUARANTEE

Any use of faulty material or manufacturing defects of the appliance will
be eliminated during the guarantee period contemplated by the law in
force in the country where the product is purchased, by repair or replace-
ment, as we decide.
The guarantee covers all substantial defects that can be assigned to man-
ufacturing faults or to the material used if the product has been used cor-
rectly, in accordance with the instructions.
The guarantee is void in the following cases:
• attempts to repair the appliance,
• technical alterations to the appliance,
• use of non original spare parts,
• tampering.
• inappropriate use, for example industrial use.
Excluded from the guarantee:
• parts subject to rapid wear.
When making a request under guarantee, apply to an authorised technical
assistance service, presenting proof of purchase of the product.
GB
ENGLISH
72