Tabla De Contenido; Symbols Used In This Document; General - Grundfos TP Serie Instrucciones De Instalación Y Funcionamiento

CONTENTS
1. Symbols used in this document
2. General
3. Delivery and handling
3.1 Delivery
3.2 Handling
4. Applications
4.1 Pumped liquids
5. Installation
5.1 Pipework
5.2 Elimination of noise and vibrations
5.3 Foundation
5.4 Terminal box positions
5.5 Base plate
5.6 Frost protection
6. Electrical connection
6.1 Frequency converter operation
7. Start-up
7.1 Priming
7.2 Checking the direction of rotation
7.3 Starting
7.4 Frequency of starts and stops
8. Maintenance and service
8.1 Pump
8.2 Motor
8.3 Service
8.4 Shaft adjustment
8.5 Blanking flanges
9. Technical data
9.1 Ambient temperature
9.2 Liquid temperature
9.3 Operating pressure/test pressure
9.4 Inlet pressure
9.5 Enclosure class
9.6 Electrical data
9.7 Sound pressure level
9.8 Environment
10. Fault finding chart
11. Disposal
Warning
Prior to installation, read these
installation and operating instructions.
Installation and operation must comply
with local regulations and accepted
codes of good practice.
10

1. Symbols used in this document

Page
Warning
10
If these safety instructions are not
10
observed, it may result in personal
11
injury!
11
11
If these safety instructions are not
11 observed, it may result in malfunction
Caution
12 or damage to the equipment!
12
Notes or instructions that make the job
13
Note
easier and ensure safe operation.
13
13
14

2. General

14
These instructions apply to the pump types TP and
14
TPD fitted with Grundfos motors. If the pump is fitted
14
with another motor make, please note that the motor
15
data may differ from the data stated in these
15
instructions.
15
16
16
16
16
16
16
17
17
17
18
18
18
18
18
18
18
18
18
19
20