flir i5 Manual De Instrucciones página 31

English
Legal disclaimer
All products manufactured by FLIR Systems are warranted
against defective materials and workmanship for a period of
one (1) year from the delivery date of the original purchase,
provided such products have been under normal storage,
use and service, and in accordance with FLIR Systems
instruction.
All products not manufactured by FLIR Systems included in
systems delivered by FLIR Systems to the original purchaser
carry the warranty, if any, of the particular supplier only and
FLIR Systems has no responsibility whatsoever for such
products.
The warranty extends only to the original purchaser and is
not transferable. It is not applicable to any product which has
been subjected to misuse, neglect, accident or abnormal
conditions of operation. Expendable parts are excluded from
the warranty.
In the case of a defect in a product covered by this warranty
the product must not be further used in order to prevent
additional damage. The purchaser shall promptly report any
defect to FLIR Systems or this warranty will not apply.
FLIR Systems will, at its option, repair or replace any such
defective product free of charge if, upon inspection, it proves
to be defective in material or workmanship and provided
that it is returned to FLIR Systems within the said one-year
period. FLIR Systems has no other obligation or liability for
defects than those set forth above.
No other warranty is expressed or implied. FLIR Systems
specifically disclaims the implied warranties of
merchantability and fitness for a particular purpose.
FLIR Systems shall not be liable for any direct, indirect,
special, incidental or consequential loss or damage, whether
based on contract, tort or any other legal theory.
Copyright
© FLIR Systems, 2008. All rights reserved worldwide. No parts
of the software including source code may be reproduced,
transmitted, transcribed or translated into any language or
computer language in any form or by any means, electronic,
magnetic, optical, manual or otherwise, without the prior
written permission of FLIR Systems.
This manual must not, in whole or part, be copied,
photocopied, reproduced, translated or transmitted to any
electronic medium or machine readable form without prior
consent, in writing, from FLIR Systems.
Names and marks appearing on the products herein are
either registered trademarks or trademarks of FLIR Systems
and/or its subsidiaries.
All other trademarks, trade names or company names
referenced herein are used for identification only and are the
property of their respective owners.
Quality assurance
The Quality Management System under which these
products are developed and manufactured has been
certified in accordance with the ISO 9001 standard.
FLIR Systems is committed to a policy of continuous
development; therefore we reserve the right to make
changes and improvements on any of the products
described in this manual without prior notice.
Patents
This product is protected by patents, design patents, patents
pending, or design patents pending. See the reference
manual on the CD-ROM for a complete list.
Warnings
This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance
with the instruction manual, may cause interference to radio
communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to
Subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against such interference
when operated in a commercial environment. Operation of
this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be
required to take whatever measures may be required to
correct the interference.
Do not disassemble or do a modification to the battery. The
battery contains safety and protection devices which, if they
become damaged, can cause the battery to become hot, or
cause an explosion or an ignition.
If there is a leak from the battery and the fluid gets into your
eyes, do not rub your eyes. Flush well with water and
immediately get medical care. The battery fluid can cause
injury to your eyes if you do not do this.
Do not continue to charge the battery if it does not become
charged in the specified charging time. If you continue to
charge the battery, it can become hot and cause an
explosion or ignition.
Only use the correct equipment to discharge the battery. If
you do not use the correct equipment, you can decrease the
performance or the life cycle of the battery. If you do not use
the correct equipment, an incorrect flow of current to the
battery can occur. This can cause the battery to become hot,
or cause an explosion and injury to persons.
Make sure that you read all applicable MSDS (Material Safety
Data Sheets) and warning labels on containers before you
use a liquid: the liquids can be dangerous.
Cautions
Do not point the infrared camera (with or without the lens
cover) at intensive energy sources, for example devices that
emit laser radiation, or the sun. This can have an unwanted
effect on the accuracy of the camera. It can also cause
damage to the detector in the camera.
Do not use the camera in a temperature higher than +50°C
(+122°F), unless specified otherwise in the technical data
section. High temperatures can cause damage to the camera.
Do not attach the batteries directly to a car's cigarette lighter
socket.
Do not connect the positive terminal and the negative
terminal of the battery to each other with a metal object
(such as wire).
Do not get water or salt water on the battery, or permit the
battery to get wet.
Do not make holes in the battery with objects. Do not hit the
battery with a hammer. Do not step on the battery, or apply
strong impacts or shocks to it.
en-US