PNI Safe House PG300 Manual De Utilización página 19

Ocultar thumbs Ver también para Safe House PG300:

Idiomas disponibles

identify them.

To set alarm address select „Alarm address" app option or send SMS:

programming password + [90] + [00] + alarm adress (30 characters) + # .

For example: if the alarm address is „Lotus str. no. 3" send SMS: 88889000Lotus str. no

Voice record alarm address

To record alarm address select „Alarm address" or send SMS:

programming password + [92] + [00]+ [1] + # to record the address then speak to the

control unit. The recording lasts10 sec. After that the unit will replay the recording.

programming password + [92] + [00] + [2] + # to delete recording

programming password + [92] + [00] + [3] + # to listen the recording

Note: Vocal recording can only be done in the control unit, so we will have to be at the

alarm location for these settings.

Zone settings

For each zone you can set type, alarm mode, siren and home arm option.

To do zone settings select

programming password + [60] + zone number (01-07) + alarm mode (1~4) + zone type

(1~8) + siren (0/1) + # .

Alarm mode: 1 - real time; 2 - delay (default delay is 40 sec); 3 - 24 hours; 4 - bypass.

Zone type: 1 - SOS ; 2 - ﬁre; 3 - gas; 4 - door; 5 - hall; 6 - window; 7 - balcony; 8 - bypass;

Siren: 0 - activate siren on alarm; 1 - do not activate siren on alarm;

For example: to set zone 1 as ﬁre zone with 24 hours monitoring and siren trigger in case

of alarm send SMS: 88886001321#

Note: All 10 detectors in one zone will have the same settings set for that zone.

Home arm

To set home arm for one zone select „Zone settings" app option or send SMS:

programming password + [61] + zone number (01-07) + [0/1] + # (0 - arm zone on home

arm / 1 - do not arm zone on home arm).

For example: to set zone 1 to arm on home arm send SMS: 888861011# .

Enable/disable arm delay

To enable/disable arm delay select „Other functions" app option or send SMS:

programming password + [47] + [0/1] + # (0 - disable arm delay / 1 - enable arm delay).

Default arm delay is 60 sec.

Set arm delay

To set arm delay time select „Arm delay" app option or send SMS: programming

password + [44] + delay (001~180 sec) + # .

For example: to set an arm delay of 46 send SMS: 888844046# .

Set alarm delay

To set alarm delay time select „Alarm delay" app option or send SMS:

„Zone settings" app option or send

SMS: