PNI Safe House PG300 Manual De Utilización página 14

Please read this manual carefully before using the alarm system. The set-up for
this system requiers some basic IT and PC knowledge, to better understand and
interpret the technical terms and procedures.
Main features
Ÿ PNI SafeHouse APP control (Android, iOS)
7 zones with 10 wireless detectors each and 3 wired zones
Ÿ
7 zone LEDs and 2 for system status and GSM signal
Ÿ
Strong speaker for voice
Ÿ
Support CID protocol for security dispatch
Ÿ
One NO/NC relay output
Ÿ
6 phone numbers for voice warnings and 3 for SMS
Ÿ
Remote arm/disarm, intercom and monitor
Ÿ
Individual programing for each zone
Ÿ
Built-in backup battery
Ÿ
Support wireless siren
Ÿ
Total or home arm
Ÿ
Programable auto arm/disarm
Ÿ
Main unit description
1. Zone LEDs: when the LED flashes the zone is in alarm mode.
2. System status LED: this will be off when the system is disarmed , ON when the system
is armed and flashes on the system is home armed.
3. GSM signalLED: if the GSM signal is normal then the LED will flash every 3 sec. If the
GSM signal is missing then the LED will flash every second.
4. Speaker
prompts
4
13 13
EN
1
2
3