all-clad NC00134439 Guia Del Usuario página 32

Problems
Unable to close the lid.
Intense release of pressure
from pressure limit valve.
Food is not cooked or
badly cooked
32
Possible causes
Sealing gasket is not properly
installed.
The float valve is stuck because it is
dirty, and it blocks the mechanism
of the lid.
Faulty pressure control resulted in
release of pressure.
Pressure limit valve did not fall into
place.
Rice: water ratio is incorrect.
No electricity from the power grid.
Solutions
Install the sealing gasket properly on the metal
ring.
Please use a stick to poke the float valve, to
make it fall down.
Dismantle the float valve to clean it (see more
details in the section "How to clean") Never
attempt to use the appliance when the float
valve is dirty.
Send to repair and maintenance department.
Gently press the pressure limit valve to make it
fall into place. Refer to page 11 for the correct
position of the valve.
Use the required rice/water ratio. Be sure the
releasing valve is not dirty and create leakage
during cooking.
Check the home electric circuit.