Sear - all-clad NC00134439 Guia Del Usuario

• Once the settings are selected, press the
display shows
• After the pre-heating period, cooking will start and the appliance will beep.
• Place the ingredients in the cooking bowl. Take care of the projections if you put fresh food in hot oil.
• The time will be displayed and counting down.
• You can change the time setting during cooking: press the
buttons. You can do the same for the temperature setting.
• Once the new settings are selected, press the
time will be counting down.
• Once the count down ends, the cooking stops and the appliance will beep 3 times. You can remove the food.
NOTE: the button is not active for this function.
There is no KEEP WARM on this function.
This function is ideal to brown and caramelize the ingredients directly in the cooking bowl before pressure or slow
cooking, adding a fine flavor to your dishes.
• Open the lid of the appliance and keep it open.
• Place the ingredients in the cooking bowl.
• Press any button to activate the unit. The display will blink
• Press the button 4 times to select SEAR. The SEAR function will light up.
• A default time value will be displayed (
.
button to start preheating. The appliance will beep. And the
button and adjust the time value by pressing the
button to continue cooking. The appliance will beep and the

SEAR

.
). Adjust the time by pressing the
EN
buttons.
23