CONNECTING TO THE POWER SUPPLY
1. Make sure the power cord is plugged in properly to both the appliance and the outlet.
2. Only connect the appliance to grounded electrical outlet. If the sockets and plug on the appliance are not
compatible, consult a professional qualified technician to replace the outlet with a more suitable one.
3. Do not use the appliance if:
- It or its cord is damaged.
- The appliance has been dropped, shows visible damage, or does not work properly.
In these cases, the appliance must be sent to an approved Service Center. Do not take the appliance apart
yourself.
4. Do not use an extension cord. If you accept liability for doing so, only use a grounded extension cord which is
in good condition and is suited to the wattage of the appliance.
5. If the power cord is damaged, it must be replaced by the manufacturer, an authorized Service Center or a
similarly qualified person in order to avoid any danger.
6. Do not leave the cord hanging.
7. Do not unplug the appliance by pulling on the cord.
8. Always unplug the appliance immediately after use; when moving it; prior to any cleaning or maintenance.
USE OF THE APPLIANCE
1. Use a flat and stable, heat resistant work surface, away from any water splashes.
2. Always place your Electric Pressure Cooker on a dry surface.
3. Always check the pressure release devices for clogging before use.
4. Make sure that the Electric Pressure Cooker is properly closed before using it for pressure cooking.
5. It is highly recommended not to move the Electric Pressure Cooker when it is under pressure. The pressure limit
valve may move: this could cause burns by steam being released.
6. Do not touch the hot surfaces. Be careful, metal parts and especially the lid are very hot. Always wear oven mitts.
7. Never use the bowl handles to carry the product, use the carrying handles on the product body.
8. Your Electric Pressure Cooker cooks under pressure. Burns could result from boiling over if not used properly.
EN
5