Petsafe Wireless Pet Containment System Guía Para El Uso página 11

The Receiver
Collar is
beeping inside
the house.
The Receiver
Collar activates
in the middle
of the yard.
The Receiver
Collar is
beeping but
my pet is not
responding
to the Static
Correction.
• Make sure the Transmitter is on and set up
according to the directions.
• Ensure the entire house is within the Pet Area.
The Transmitter may need to be moved to
adjust the Pet Area to include the entire house.
• If relocating the Transmitter, remove the
Receiver Collar from your pet before turning the
Transmitter off.
• The Receiver Collar activates when it loses the
Transmitter signal. This sometimes occurs if a
large metal object is between the Receiver Collar
and Transmitter, if the orientation of the Receiver
Collar changes near the Boundary Zone, or if the
surrounding "electronic noise" interferes with the
signal. If this continues to occur, consider relocating
the Transmitter and resetting the Pet Area.
• Make sure the Static Correction Level is set at 2
or above.
• Test the Receiver Collar with the Test Light.
• If the Test Light fl ashes, check the fi t of the
Receiver Collar.
• Trim your pet's fur where the Contact Points
touch the neck and/or switch to the longer
Contact Points.
• Increase the Static Correction Level.
• Repeat training steps to reinforce training.
www.petsafe.net 11