YAKINIKU KAMADO Manual De Instrucciones página 47

STEP 1
STEP 3
STEP 1 - Insert the screw (B) through the hole of both Cart legs (1,2) and then
tighten the cap nuts (A) by hand.
(Note: The screws should be facing downwards).
STEP 2 - Use 2 screws (B) and cap nuts (A) to manually install the Back strap
(3) to the stand. Then use 1 screw and 1 cap nut to mount the Front strap (4)
on the other side of the stand. Repeat this step for both Front strap (4) pieces.
STEP 3 - Attach the two Steel carrier handles (5) to the stand with a screw-
driver. Then tighten all screws and cap nuts with a wrench.
STEP 4 - Lift the kamado out of the box and place it in the assembled stand.
Scan the code for detailed assembly videos:
STEP 2
STEP 4
47
EN