YAKINIKU KAMADO Manual De Instrucciones página 45

STEP 6 - Apply the brakes on the castor wheels (3) by pushing the levers down.
STEP 7 - Use at least two people to place the Kamado body (17) in the stand.
Do not lift the appliance by the hinge as this may result in personal injury or
damage to the product.
STEP 8 - To attach the handle (7) to the Kamado lid (11), remove the 2x pre-attached
cap nuts and split washers from the strap on the Kamado lid (11). Align the
holes in the handle bracket with the fixed screws. Replace the split washers
and tighten the cap nuts with the wrench provided. When placing the kamado,
make sure that the castor wheels with the brakes (3) are positioned from the
front.
STEP 9 - Place the daisy wheel with rain cover (10) on top of the Kamado lid
(11). Before lifting the lid of the kamado, make sure the disc's YAKINIKU
®
logo is facing forward. If placed incorrectly, the vent will open when the lid is
lifted. To adjust the ventilation, simply turn the device into the correct position.
Make sure the daisy wheel (10) is securely in place before lifting the Kamado
lid (11).
STEP 10 - Remove the 8x pre-assembled cap nuts and 8 x front mounted
split washers (no longer needed) of the front mounted bolts on the metal
strap on the Kamado body (17). Place the 4x brackets (8) on the pre-mounted
bolts and make sure that the opening for the shelves is facing up. Secure by
re-tightening the 8x cap nuts and tighten with the wrench provided. Make sure
the cap nuts are not overtightened as this may damage the Kamado body (17).
STEP 11 - Slide each Side table (9) onto the Brackets (8).
STEP 12 - Place the Ash pan holder (16), Firebox (15), the Ash pan (14) and
the Coal basket (13) into the Kamado body (17).
STEP 13 - Place the Stainless steel grid (12) in the Kamado body (17).
EN
45