GRAPHITE 59G261 Manual Del Usuario página 13

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
● Before connecting the sander to mains network ensure the supply voltage matches the voltage on the
rating plate of the tool.
● Connect the long reach sander only to electrical system equipped with residual current circuit breaker
that will cut the power off in less than 30 ms after earth leakage current exceeds 30 mA.
● Use dust extraction system with the sander.
● Before switching the sander on ensure the abrasive paper is well installed on the working pad and it does
not have contact with surface to be processed.
● Hold the sander firmly during operation.
● Do not touch moving parts of the sander.
● Wear anti-dust protective mask and protection glasses that adhere to face. Dust arising when sanding
plaster surfaces is harmful to health.
● Bystanders should not enter rooms where plaster is sanded. Do not eat or drink in the room.
● Do not operate the sander wet.
● Keep the power cord away from moving parts of the sander at all times.
● If the power cord is damaged during operation, disconnect the power supply immediately. DO NOT
TOUCH POWER CORD BEFORE DISCONNECTING THE POWER SUPPLY.
● WARNING. Working pad rotates for some time after the motor is switched off.
● Keep unwound power cord away from cutting parts.
● Do not allow children and persons not familiarized with instruction manual to operate the sander.
● REMEMBER. Operator or user is responsible for any accident or emerging hazards to other persons or
surrounding.
● Remove plug from mains socket:
- whenever you go away from the tool;
- before checking, cleaning or repairing the tool.
● Only authorised persons should repair the sander.
● Use only spare parts recommended by the manufacturer.
MAINTENANCE AND STORING
● Keep all components in good condition to ensure the sander works safely.
● To keep the operation safe, replace worn out and damaged parts.
● Protect the sander against moisture.
● Keep the tool beyond reach of children.
● Use appropriate type of sanding paper.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of operational injuries.
Explanation of used symbols
1. Warning, use precaution measures
2. Read instruction manual, observe warnings and safety conditions therein!
LONG REACH SANDER
59G261
DETAILED SAFETY REGULATIONS
13