GRAPHITE 59G261 Manual Del Usuario página 14

3. Use individual protection measures (protective goggles, earmuff protectors, anti-dust mask)
4. Disconnect the power cord before starting maintenance or operation.
5. Use protective clothes.
6. Use protective shoes.
7. Protect against humidity.
8. Protection class 2
CONSTRUCTION AND USE
Long reach sander is a hand power tool driven by a single-phase commutator motor. The sander is designed
for dry finishing sanding of walls, ceilings and other finishing coat surfaces. Two tilting axes of the sander
head allows to adhere to any surface of a ceiling or wall. Thanks to extension it is possible to operate without
a ladder. The sander is equipped with system that allows connecting external dust extraction system, which
must be operating when working with the sander. Range of use covers repair and building works, and any
work from the range of individual, amateur activities (tinkering).
Use the sander only with dust extraction system connected, e.g. industry or workshop vacuum
cleaner designed for sucking gypsum dust.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Dust extraction hose
2. Arm
3. Wheel for rotational speed control
4. Switch
5. Clamp cap
6. Motor
7. Working pad cover
8. Working pad
9. Additional handle
10. Extension arm
11. Reducer sleeve
12. Suction hose
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Extension arm
2. Reducer sleeves
3. 1.2 m suction hose (4 m when stretched)
4. Shoulder strap
5. Sanding paper (various grades)
6. Screwdriver
7. Hexagonal key
8. Transport bag
- 1 pce
- 3 pcs
- 1 pce
- 1 pce
- 14 pcs
- 1 pce
- 1 pce
- 1 pce
14