You can back up the system completely or restore data and configuration previously saved on
a USB stick.
This section describes the steps to be taken to export or import the data.
N.B. It is recommended to use an empty USB stick that is dedicated to data save and
recovery operations.
© Adam Equipment 2018
System backup: this command allows
you to save all users and their
configurations stored in the system,
including its drying database and
saved test results.
You must have a USB stick to back up.
Insert the stick into the USB port on the left
side of the balance, and press the "OK"
key.
Tap the "Cancel" button to cancel the
backup operation.
If the USB stick is inserted successfully,
after
confirmation,
keypad will automatically be displayed for
entering the name that you want to assign
to backup.
A screen with the message "Done!" will
confirm that the export operation was
successful.
A backup folder with the assigned name
was then created on the USB stick.
Opening the folder, you will find a set of
files and subfolders that contain all the
data.
N.B: Do not modify or rename any files to
avoid damaging the content. The folder will
be automatically restored to the balance by
using the System Restore command.
System restore: this command allows
you to restore all users and their
system
configurations
exported with the backup command on
a USB stick.
37
the
alphanumeric
previously