Baume & Mercier Clifton 65717 Manual Del Usuario página 11

RAPID DAY CHANGE
WARNING:
In order to prevent damage to the movement, it is extreme-
ly important that you do not use the rapid day change func-
tion between 8 pm and 2 am; this is when the movement
pinions are working to automatically change the day.
1) Pull the crown to Position 2.
2) Turn the crown clockwise until the desired day (K)
appears.
3) Reset the crown (Position 1).
DUAL TIME FUNCTION
WARNING :
Do not adjust immediately after re-setting the time on your
watch in a counter-clockwise direction. This may damage
the movement. In this specific situation, wait approximate-
ly 30 minutes before setting the second time zone.
8
24
Adjustment by crown
Set the crown in Position 2, and then turn it clockwise to set
the second time zone hand (D) at the desired time.
Adjustment by corrector
If your watch has a corrector, press the corrector button
(C1) several times to move the second time zone hand (D)
forward and position it to the time of the desired zone. To
do this, use the small tool contained in the watch case.
RETROGRADE DATE
Adjustment of the day and date on this watch does not
feature a rapid change function and is thus done via the
time-setting procedure.
To set your watch, please perform these steps in the fol-
lowing order:
Setting the day of the week
1) Pull the crown to Position 3
2) Turn the crown in either direction until the day hand (K)
indicates the day immediately preceding the desired
day.
3) Position the hands (A, B) at 2 am.
Setting the date
4) Reset the crown to Position 2.
5) Turn the crown so as to move the date (E) chronologically
forward to one day before the desired date.
8 22
13
14