Product Safety Information; Prior To Use; Product Specifications - Ingersoll Rand 93 Serie Especificaciones Del Producto

Product Safety Information

Intended Use:
These Air Percussive Diggers are designed for digging, cutting and breaking of asphalt, masonry
and other compacted materials through repetitive application of linear impacts of a tool steel
that is retained and driven by the Digger.
For additional information refer to Product Safety Information Manual Form 04581450.
Manuals can be downloaded from ingersollrandproducts.com

Prior to Use

•
Do not lubricate tools with flammable or volatile liquids such as kerosene, diesel or jet
fuel. Use only recommended lubricants.
•
Use only proper cleaning solvents to clean parts. Use only cleaning solvents which meet
current safety and health standards. Use cleaning solvents in a well ventilated area.
Tools are coated inside and out with rust-resisting oil before leaving the factory. Before using the
tool, remove this oil by dipping the tool in a suitable cleaning solution to wash the oil from the
exterior. Pour about 6 cm
tool for about 15 seconds. Dry the tool immediately after cleaning, pour 3 cm
No. 10 Oil into the air inlet and again operate the tool for 5 seconds to lubricate all working parts.

Product Specifications

Model(s)
93A1
93A1-EU
93A4
93A4-EU
93LA1
93LA1-EU
95A1
95LA1
95LA3
16574139_ed3
WARNING
of a clean, suitable, cleaning solution into the air inlet and operate the
3
Retainer Type
Required Supplied
Yes Sleeve
Yes Sleeve
Yes Hitch
Yes Hitch
Yes Latch
Yes Latch
Yes Sleeve
Yes Latch
Yes Latch
of Ingersoll Rand
3
Shank Size
Blows per
Inch
7/8 x 3-1/4
7/8 x 3-1/4
7/8 x 3-1/4
7/8 x 3-1/4
7/8 x 3-1/4
7/8 x 3-1/4
7/8 x 3-1/4
7/8 x 3-1/4
1 x 4-1/4
EN
Minute
2,350
2,350
2,350
2,350
2,350
2,350
1,850
1,850
1,850
EN-1