JVC KD-AVX2 Manual De Instrucciones página 56

• This receiver can play back the files recorded
in VBR (variable bit rate).
The files recorded in VBR have a discrepancy
in elapsed time display, and do not show
the actual elapsed time. Especially, after
performing the search function, this
difference becomes noticeable.
• This receiver cannot play back the following
files:
– MP3 files encoded with MP3i and MP3 PRO
format.
– MP3 files encoded in an unappropriated
format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless,
professional, and voice format.
– WMA files which are not based upon
Windows Media® Audio.
– WMA files copy-protected with DRM.
– WMA files recorded with MBR (Multiple
Bit Rate) format.
– Files which have the data such as AIFF,
ATRAC3, etc.
Playing a JPEG disc
• It is recommended that you record a file
at 640 x 480 resolution. (If a file has been
recorded at a resolution of more than 640 x
480, it will take a long time to be shown.)
• This System can play only baseline JPEG files.
Progressive JPEG files or lossless JPEG files
cannot be played.
Baseline JPEG format: Used for digital
cameras, web, etc.
Progressive JPEG format: Used for web.
Lossless JPEG format: An old type and rarely
used now.
• If progressive or lossless JPEG files are played
back, a black screen appears. In this case, stop
playback and select a baseline JPEG file. Note
that it may take a long time to select another
file.
56
Playing an MPEG disc
• This receiver can play back MPEG 1/2 files
with the extension code <.mpg>.
• Audio stream should conform to MPEG1
Audio Layer 2.
AV Menu
• When the language you have selected is not
recorded on a disc, the original language is
automatically used as the initial language. In
addition, for some discs, the initial languages
settings will not work as you set due to their
internal disc programming.
After you change any of these language
settings, eject the disc and insert it (or another
disc) again so that your setting takes effect.
• When you select "16:9" for a picture whose
aspect ratio is 4:3, the picture slightly changes
due to the process for converting the picture
width.
• Even if "4:3PS [PAN SCAN]" is selected, the
screen size may become
"4:3LB [LETTER BOX]" with some DVDs.
This depends on how they are recorded.
• If you change the "Amplifier Gain" setting
from "High Power" to "Low Power" while the
volume level is set higher than "VOL 30", the
receiver automatically changes the volume
level to "VOL 30".