Porter Cable PCC671 Manual De Instrucciones página 9

• When cutting, always ensure that the
shoe is firmly against the workpiece.
This will improve operator control and
minimize vibration.
• For longer blade life, use bi-metal blades.
These utilize a carbon steel back welded
to high speed steel teeth making the blade
more flexible and less prone to breaking.
MAINTENANCE
WARNING:
FROM SAW WhEN PERFORMING ANY
CLEANING OR OThER MAINTENANCE.
WhEN SERvICING USE ONLY
IDENTICAL REPLACEMENT PARTS.
• Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to
various types of commercial solvents and
may be damaged by their use. Use only
mild soap and damp cloth to clean the tool.
Never let any liquid get inside the tool; never
immerse any part of the tool into a liquid.
• When electric tools are used on
fiberglass boats, sports cars, drywall
etc.,they are subject to accelerated wear
and possible premature failure, as the
fiberglass chips and grindings and drywall
dust are highly abrasive to bearings,
brushes, commutator, etc. During any
use on fiberglass or drywall it is extremely
important that the tool be cleaned
frequently by blowing with an air jet.
LUBRICATION
Your tool was properly lubricated before
leaving the factory. Once every year take
or send your tool to a Porter Cable service
center, or authorized service station,
for a complete cleaning, inspection and
lubrication. Tools "out of service" for long
periods should be relubricated before
being put back to work.
ACCESSORIES
Your reciprocating saw will accept up to a
12 inch long blade. Always use the shortest
blade suitable for your project. Longer blades
are more likely to be bent or damaged during
use. During operation, some longer blades
may vibrate or shake if the saw is not kept in
contact with the workpiece.
WARNING:
other than those offered by PORTER-
CABLE, have not been tested with this
product, use of such accessories with this
tool could be hazardous. To reduce the
risk of injury, only PORTER-CABLE
recommended accessories should be used
with this product.
A complete line of accessories is available
from your PORTER-CABLE Factory Service
Center or a PORTER-CABLE Authorized
Warranty Service Center. Please visit our
Web Site www.portercable.com for a catalog
or for the name of your nearest supplier.
REMOvE BATTERY
Since accessories,
ThE RBRC™ SEAL
The RBRC™ (Rechargeable
Battery Recycling Corporation)
Seal on the lithium-ion battery
(or battery pack) indicates that
the costs to recycle the battery (or battery
pack) at the end of its useful life have
already been paid by Porter Cable. In some
areas, it is illegal to place spent lithium-ion
batteries in the trash or municipal solid waste
stream and the RBRC program provides an
environmentally conscious alternative.
RBRC in cooperation with Porter Cable
and other battery users, has established
programs in the United States and Canada
to facilitate the collection of spent lithium-ion
batteries. Help protect our environment and
conserve natural resources by returning the
tool to an authorized Porter Cable service
center for recycling. You may also contact
your local recycling center for information on
where to drop off the spent battery, or call
1-800-8-BATTERY.
This Class B digital apparatus complies
with Canadian ICES-003. This device
complies with part 15 of the FCC rules.
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
NOTE: This equipment has been tested and
found to comply with the limits for Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and the receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Changes or modifications to this unit
not expressly approved by the party
responsible for compliance could void the
user's authority to operate the equipment.
This Class B digital apparatus complies
with Canadian ICES-003.
9