Settings
Your Nokia device normally has MMS, GPRS, streaming,
and mobile internet settings automatically configured,
based upon your service provider information. You may
have settings from your service provider already installed
in your device, or you may receive the settings from the
service provider as a special text message.
Transfer content from
another device
You can copy content such as contacts and calendar
entries from a compatible Nokia device to your Nokia
device using Bluetooth connectivity or infrared. The type of
content that can be copied depends on the phone model.
You can insert your SIM card in the other device. When
your Nokia device is switched on without a SIM card, the
offline profile is automatically activated.
Transfer content
1
Press
, and select
2
In the information view, select Continue.
3
Select whether you want to use Bluetooth connectivity or
infrared to transfer the data. Both devices must support
the selected connection type.
14
Tools
> Transfer.
4
If you select Bluetooth connectivity, to have your Nokia
device search for devices with Bluetooth connectivity,
select Continue. Select the other device from the list.
You are asked to enter a code on your Nokia device. Enter
a code (1-16 digits), and select OK. Enter the same code
on the other device, and select OK. The devices are now
paired. See "Pair devices", p. 83.
For some phone models,
device as a message. To install
device, open the message, and follow the instructions
on the display.
If you select infrared, connect the two devices.
See "Infrared connection", p. 84.
5
From your Nokia device, select the content you want to
copy from the other device.
Content is copied from the memory and compatible memory
card (if inserted) of the other device to the corresponding
location in your Nokia device and memory card (if inserted).
The copying time depends on the amount of data to be
transferred. You can cancel copying and continue later.
To view the log information of a previous transfer, in the
main view, select
Transfer
To view the devices you have copied or transferred data
from, in the main view, select Phones.
Transfer
is sent to the other
Transfer
on the other
log.