Reggiani HAKO Instrucciones Para La Instalación página 12

HAKO | ENG |
• For LEDs:
The projectors are supplied with the LED
already installed.
Remove the blue protective film before
switching on the LED (fig.5).
Do not touch the LED; in particular, avoid
the use of pointed tools which could oth-
erwise damage internal connections.
The reflector twist-lock fixing system
(present on most products equipped with
the LED) allows the adjustment of the
beam from narrow to wide or Wall Washer
Mira (refer to the catalogue or access the
product datasheet on the website:
www.reggiani.net/reference for the cor-
responding accessory).
Arrange the retainer tabs in the optical
compartment. Press and turn the reflec-
tor clockwise until it snaps into place.
The Wall Washer Mira reflectors enable
additional adjustment of the elliptical
beam by rotating the shield. There is no
provision for replacing the light source on
LED projectors. If any malfunction occurs,
contact Reggiani Spa Illuminazione to re-
place the luminare.
www.reggiani.net
5
A
5
B
5
C
012