Colour Qc; Measuring Samples; Saving A Tag With A Measurement - Lovibond LC 100 Guia De Inicio Rapido

6. Colour QC

Measuring Samples

1. Select the Standard icon in the function bar by pressing on the right or
left side of the Navigation control.
2. If the selected standards (indicated by the star) are not the standards
required for sample comparisons, press the down side of the Navigation
control and select the desired standard. Press the Enter button to toggle
between selected (star icon) and not selected (no star icon). Continue
for all standards.
3. When finished, press the right side of the Navigation control (Exit) twice
to advance to the Colour QC screen.
4. Lightly press and hold the Measure button to activate the preview. The
area to be measured is indicated in the preview by the circle.
5. When you have located the area you wish to measure, press the
Measure button firmly.
6. Continue with additional measurements to obtain an average value if
sample averaging is activated in the Settings.
7. After the measurement, a simulated colour patch of the sample appears
along with the Pass/Fail indication. The sample below would indicate
that the sample failed based on the tolerance set in the Setting menu.
8. Press the down side of the Navigation control to advance to additional
QC Sample data screens.

Saving a Tag with a Measurement

Each measurement is automatically saved in the sample record. A voice tag or
text tag can be saved with each sample measurement.
Lovibond® LC 100
8