BENDIX Activa Fusion Manual Del Operador página 9

Canceling Cruise Control and Active Cruise with Braking
At any time, you can step on the brake pedal, press "cancel," or turn cruise
control off (normal methods) to cancel cruise control and the ACB Auto‑
Resume feature.
Shown here is an example of a message you may get
when ACB Auto‑Resume is active. Alerts and messages
to the you will either come from the dash or the Bendix
® ACB Auto-Resume
Driver Interface Unit (DIU ) display. Please verify with the
™
vehicle operator's manual for the actual audible and visual
indications your vehicle may display. NOTE: As the driver,
you should always be alert and ready to take over.
Passing a Vehicle / Changing Lanes
If you choose to pass a vehicle, you can apply throttle at any time to increase
speed. As you pass the forward vehicle, it will go out of sight of the Bendix
®
Fusion system.
™
When No Other Vehicles are Present
When no forward vehicle is within range of the Fusion system, your vehicle
will maintain its set speed just like ordinary cruise control.
The Forward Detected Vehicle Icon
When cruise control is switched on and set, and a vehicle
ahead of you is detected by the radar, the forward detected
vehicle icon (or similar) on the vehicle dashboard will illuminate.
This is an indication to you that the Fusion system is actively managing the
distance between your vehicle and the vehicle ahead, and that the system may
automatically intervene.
What is Following Distance?
Following distance refers to the time gap – measured in seconds – between
the vehicle equipped with the Fusion system and the vehicle ahead. The
actual physical distance between the two will vary based on the speeds of
both vehicles.
9