Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ptetety around the rear h andle whether
your are right handed
or left handed.
Keep
your l eftarm straight withtheelbow
locked.
• Position your left hand on the front handle-
bar so it is in a straight
line with your right
hand
on the rear
handle
when
making
bucking
cuts.
Never reverse right and left
hand positions
for any type of cutting.
• Stand with your weight evenly batanced
on
both feet.
• Stand slightly to the left side of the saw to
keep your body from being in a direct line
with the cutting
chain.
• Do not overreach.
You could be drawn or
thrown off balance and lose control of the
saw.
• Do not cut above shoulder
height, it is diffi-
cult
to maintain
control
of saw
above
shoulder
height.
KICKBACK
SAFETY
FEATURES
Al_ WARNING:
The following
features
are included on your saw to help reduce the
hazard of kickback;
however,
such features
will not totally
eliminate
this danger.
As a
chain saw user, do not rely only on safety de-
vices,
You must follow
all safety
precau-
tions, instructions,
and maintenance
in this
manual
to help avoid
kickback
and other
forces which can result in serious
injury.
• Reduced-Kickback
Guide Bar, designed
with a small radius tip which
reduces
the
size of the kickback
danger
zone on the
bar tip. A Reduced-Kickback
Guide
Bar
has been demonstrated
to significantly
re-
duce the number and seriousness
of kick-
backs
when
tested
in accordance
with
safety requirements
for gasoline
powered
chain saws as set by ANSi B175.1.
Reduced
Kickback
Symmetrical
Guide
Bar
_all
Radius
Tip
• Low-Kickback
Chain,
designed
with
a
contoured
depth
gauge
and guard
link
which
deflect
kickback
force
and allow
wood to gradually
ride into the cutter. Low-
Kickback
Chain
has
met kickback
per-
formance
requirements
when tested
on a
representative
sample
of chain saws
be-
low 3.8 cubic inch displacement
specified
in ANSI B175.1.
::'nhgai::%d
Uok
Low-Kickback
_
and
allows
wood
Chain
to gradually
ride
into
cutter
_.-_"
Can
Obstruct
Material
Nora
Low-
_
_
Chain
• Front Hand Guard, designed to reduce the
chance of your left hand contacting the chain
if your hand slips off the front handlebar.
• Position
of front and rear handlebars,
de-
signed with distance between
handles and
"in-line" with each other.
The spread and
"in-line" position
of the hands provided
by
this design
work together to give balance
and resistance
in controlling
the pivot of
the saw back toward the operator
if kick-
back occurs.
CHAIN
BRAKE
AND
CKA
ANGLE
• Chain Brake, designed
to stop the chain in
the event of kickback.
_IkWARNING:
WE
DO NOT
REP-
RESENT
AND
YOU
SHOULD
NOT
AS-
SUME
THAT
THE
CHAIN
BRAKE
WILL
PROTECT
YOU IN THE EVENT OF A KICK-
BACK,
Kickback
is a lightning fast action
which throws the bar and rotating chain back
and up toward the operator,
Kickback can be
caused by allowing contact of the bar tip in the
danger zone with any hard object,
Kickback
can also be caused by pinching the saw chain
along the top of tt_e guide bar. This action may
push the guide bar rapidly back toward the op-
erator.
Either of these events may cause you
to lose control of the saw which could result in
serious injury or even death.
DO NOT RELY
UPON ANY OF THE DEVICES
BUILT INTO
YOUR SAW. YOU SHOULD
USE THE SAW
PROPERLY
AND CAREFULLY
TO AVOID
KICKBACK.
Reduced-kickback
guide bars
and
low-kickback
saw
chains
reduce
the
chance
and magnitude
of kickback
and are
recommended.
Your saw has a low kickback
chain and bar as original equipment.
Repairs
on a chain brake should be made by an autho-
rized servicing
dealer.
Take your unit to the
place of purchase if purchased from a servic-
ing dealer, or to the nearest authodzed master
service dealer.
• Tip contact in some cases may cause a light-
ning fast reverse REACTION,
kicking guide
bar up and back toward operator.
• Pinching the saw chain along the top of the
guide bar may push the guide bar rapidly
back toward the operator.
• Either of these reactions may cause you to
lose control of the saw which could result in
serious injury. Do not rely exclusively
upon
devices built into your saw.
Tabla de contenido
