Reverse The Doors - Haier HRB10N2 Manual Del Usuario

4. Lift the front of the refrigerator top enough to access the
door hinge screws.
5. Remove the bolts from the top hinge and remove top
hinge (1).
6. Lift the refrigerator door from the center hinge (2).
7. Unscrew the bolts and remove the center hinge (3).
8. Lift the freezer door from the bottom hinge (4).
9. Remove the plastic cover from the front, top trim (5).
10. Using two or more people, tilt the refrigerator toward the
back at a 45° angle to access and remove the leveling
foot (7 & 8).
11. Remove the bottom door hinge and leveling foot (9).
NOTE: The leveling foot on the hinge side must be
moved to the opposite side with the door hinge.

REVERSE THE DOORS

1. Remove the hole plugs from the center divider and
place the plugs in the holes remaining after removing the
center hinge (6).
2. Remove the plastic cover. Install the stopper (provided in
the parts bag), to the opposite side (10).
3. Unscrew and remove the middle hinge bushing from the
bottom of the refrigerator door (11).
4. Install the middle hinge bushing (provided in the parts
bag) to the opposite side. (12)
5. Remove the hinge bushing and the stopper from the
freezer door and reinstall each to the opposite side of the
door. (13)
6. Remove the bottom hinge bushing from the freezer door
and reinstall it on the opposite side. (14)
6
REPLACE THE DOORS
1. Reassemble and install the bottom hinge on the opposite
side. (15)
2. Using two or more people, reinsert the leveling foot to
the opposite side with the bottom door hinge. (16)
3. Rotate the top hinge 180°. Unscrew the hinge pin and
reinstall it to the opposite side. (17)
4. Place the freezer door onto the bottom hinge and close
the door. (18)
5. Place the center hinge on top of the freezer door. (19)
6. Fasten the center hinge to the cabinet, and then align and
adjust the door. (20)
7. Install the refrigerator door on top of the center
hinge. (21)
8. Reinstall the top hinge and tighten the bolts. (22)
9. Reinstall the plastic cover on the front, top trim. (23)
10. Completely tighten all bolts.
11. Using two or more people, stand the refrigerator
completely upright, and adjust the front feet to level. See
"Leveling and Door Adjustment."
12. Return all removable parts to the cabinet and door.
REVERSE DOOR SWING