Dometic WAECO MagicTouch MT200 VW10 Manual Del Usuario página 11

MagicTouch MT200 VW10
Skoda Octavia
The central locking activation is conducted by means of the central locking control
device of your vehicle. The control device is located on the left of the steering column
(fig. 5, page 3).
➤
Connect the following cables of the radio remote control using piercing connec-
tors:
– Connect the grey cable to the white/blue cable (ws/bl) (pin 2 on the 23-pin
plug) of the original cable strand (on the control device)
– Connect the blue/red cable to the black/blue cable (sw/bl) (pin 4 on the
23-pin plug) of the original cable strand (on the control device)
Skoda Fabia and VW Polo
The central locking activation is conducted by means of the central locking control
device of your vehicle. The control device is located on the heating box in the footwell
on the driver's side (fig. 6, page 3).
➤
Connect the following cables of the radio remote control using piercing connec-
tors:
– VW Polo: connect the grey and the blue/red cables to the white/blue
cable (ws/bl) (pin 6 on the 23-pin, black plug) of the central locking control
device
– Skoda Fabia: connect the grey and the blue/red cables to the yellow/blue
cable (ge/bl) (pin 6 on the 23-pin, black plug) of the central locking control
device
2.3 Indicator activation
VW Passat
The activation of the vehicle indicators is conducted on the left A pillar in the footwell
on the 10-pin, brown plug (fig. 7, page 4).
➤
Lay the black/white cable and the black/green cable of the radio remote control
along the original cable strand to the central locking control device.
➤
Connect the following cables of the radio remote control using piercing connec-
tors:
– Connect the black/white cable to the black/white cable (sw/ws) (pin 9 of the
brown, 10-pin plug)
– Connect the black/green cable to the black/green cable (sw/gn) (pin 9 of the
brown, 10-pin plug)
Installing and connecting the MT200
11