Dometic WAECO MagicTouch MT200 VW10 Manual Del Usuario página 10

Installing and connecting the MT200
Skoda Fabia and VW Polo
➤
Disconnect the ring sleeves from the following cables of the radio remote
control:
– Red cable
– Orange cable
➤
Connect the following cables of the radio remote control using piercing connec-
tors (fig. 2, page 2):
– Skoda Fabia: connect the red cable to the black/red cable (sw/rt) in the
brown, 5-pin plug on the power distributor box underneath the dashboard on
the driver's side
– VW Polo: connect he red cable to the red/yellow cable (rt/ge) in the brown,
5-pin plug on the power distributor box underneath the dashboard on the
driver side
– Connect the orange cable to the black (sw) or black/red (sw/rt) cable from
pin 12 in the brown, 18-pin plug on the power distributor box underneath the
dashboard on the driver's side
➤
Connect the black cable of the radio remote control to an available earth point.
2.2 CL activation
VW Passat
The central locking activation is conducted by means of the central locking control
device of your vehicle. The control device is located in a plastic box under the carpet
in front of the driver's seat.
➤
Remove the skirting board on the driver's side.
➤
Lift up the carpet and pull the plastic box (fig. 3 1, page 2) out to the front.
➤
Open the plastic box.
➤
Lay the grey and blue/red cables of the radio remote control along the original
cable strand to the plastic box.
➤
Connect the following cables of the radio remote control using piercing connec-
tors (fig. 4, page 3):
– Connect the grey cable to the brown/blue cable (br/bl) (pin 2 on the 23-pin
plug) of the original cable strand (on the control device)
– Connect the blue/red cable to the brown/green cable (br/gn) (pin 4 on the
23-pin plug) of the original cable strand (on the control device)
10
MagicTouch MT200 VW10