Additional Notes - Dentsply Sirona Cercon ht Instrucciones De Uso

IMPORTANT!
The sintering of Cercon ht in third-party sintering furnaces is done at the user's own responsibility and risk.
DeguDent can accept no responsibility for any kind of damage caused by the sintering of zirconia materials in
third-party furnaces, including but not limited to damage to or damage caused by the sintered objects such as
abutments, crowns or bridge frameworks.

Additional notes:

The programming you use for your sintering furnace should be analogous to the DeguDent sintering programs.
General Sinter programs Cercon ht all shades
Material:
Cercon ht, all shades
Sinter program for bridge
frameworks up to 8 units
Sinter program for bridge
frameworks for 9 or more units
Speed-Sinter program für bridge
frameworks up to 6 units
1) Room temperature
Material:
Cercon ht, all shades
Sinter program for bridge
frameworks up to 8 units
Sinter program for bridge
frameworks for 9 or more units
Speed-Sinter program für bridge
frameworks up to 6 units
1) Room temperature
Material:
Cercon ht, all shades
Sinter program for bridge
frameworks up to 8 units
Sinter program for bridge
frameworks for 9 or more units
Speed-Sinter program für bridge
frameworks up to 6 units
1) Room temperature
Cercon® ht Instructions for Use
Start- Ramp Temp. 1
Temp. time
°C min °C
RT 40 900
1)
RT 120 860
1)
RT 90 1540
1) 2)
2) valid for closed sinter bowls, otherwise 1520°C
Start- Ramp Temp. 1
Temp. time
°C °C/min °C
RT 22 900
1)
RT 7 860
1)
RT 17 1540
1) 2)
2) valid for closed sinter bowls, otherwise 1520°C
Start- Ramp Temp. 1
Temp. time
°C °C/h °C
RT 1320 900
1)
RT 420 860
1)
RT 1020 1540
1) 2)
2) valid for closed sinter bowls, otherwise 1520°C
Holding Ramp Temp. 2
time time
min min °C
0 55 1500
0 320 1500
35 20 1150
Holding Ramp Temp. 2
time time
min °C/min °C
0 11 1500
0 2 1500
35 18 1150
Holding Ramp Temp. 2
time time
h:min °C/h °C
00:00 660 1500
00:00 120 1500
00:35 1080 1150
Holding Cooling
time
min
145 With closed furnace cooling
down to 200 °C
120 With closed furnace cooling
down to 200 °C
0 Gradual opening of the furnace
within 35 Min down to 200 °C
Holding Cooling
time
min
145 With closed furnace cooling
down to 200 °C
120 With closed furnace cooling
down to 200 °C
0 Gradual opening of the furnace
within 35 Min down to 200 °C
Holding Cooling
time
h:min
02:15 With closed furnace cooling
down to 200 °C
02:00 With closed furnace cooling
down to 200 °C
00:00 Gradual opening of the furnace
within 35 Min down to 200 °C
67