Additional Notes - Dentsply Sirona Cercon base Instrucciones De Uso

For these reasons, we cannot grant general approval for the use of third-party furnaces for sintering two-piece
abutments (mesostructures) and crown and bridge frameworks made of Cercon® base, Cercon® ht and
Cercon® xt We will, how ever, open the system technically for the use of furnaces of third-party furnaces only
on condition that the following requirement are met:

Additional notes:

The programming you use for your sintering furnace should be analogous to the Dentsply Sirona sintering programs
General Sinter programs Cercon® base, Cercon® ht and Cercon® xt all shades
Material:
Sinter program for bridge frameworks up to
8 units ( Cercon® base, Cercon® ht) and bridge
frameworks up to 3 units ( Cercon® xt)
Sinter program for bridge frameworks for
9 or more units ( Cercon® base, Cercon® ht)
Speed-Sinter program for bridge frameworks
up to 6 units ( Cercon® base, Cercon® ht) and
for bridge frame works up to 3 units ( Cercon® xt)
Material:
Sinter program for bridge frameworks up to
8 units ( Cercon® base, Cercon® ht) and bridge
frameworks up to 3 units ( Cercon® xt)
Sinter program for bridge frameworks for
9 or more units ( Cercon® base, Cercon® ht)
Speed-Sinter program for bridge frameworks
up to 6 units ( Cercon® base, Cercon® ht) and
for bridge frame works up to 3 units ( Cercon® xt)
Material:
Sinter program for bridge frameworks up to
8 units ( Cercon® base, Cercon® ht) and bridge
frameworks up to 3 units ( Cercon® xt)
Sinter program for bridge frameworks for
9 or more units ( Cercon® base, Cercon® ht)
Speed-Sinter program for bridge frameworks
up to 6 units ( Cercon® base, Cercon® ht) and
for bridge frame works up to 3 units ( Cercon® xt)
1) Room temperature 2) valid for closed sinter bowls, otherwise 1520 °C
6
Start- Ramp
Temp. time Temp. 1
°C min °C
RT 40 900
1)
RT 120 860
1)
RT 90 1540
1) 2)
Start- Ramp
Temp. time Temp. 1
°C °C / min °C
RT 22 900
1)
RT 7 860
1)
RT 17 1540
1) 2)
Start- Ramp
Temp. time Temp. 1
°C °C / h °C
RT 1320 900
1)
RT 420 860
1)
RT 1020 1540
1) 2)
Holding Ramp
time time Temp. 2
min min °C
0 55 1500
0 320 1500
35 20 1150
Holding Ramp
time time Temp. 2
min °C / min °C
0 11 1500
0 2 1500
35 18 1150
Holding Ramp
time time Temp. 2
h : min °C / h °C
00 : 00 660 1500
00 : 00 120 1500
00 : 35 1080 1150
Holding
time
Cooling
min
With closed furnace
145
cooling down to 200 °C
With closed furnace
120
cooling down to 200 °C
Gradual opening of the furnace
0
within 35 Min down to 200 °C
Holding
time
Cooling
min
With closed furnace
145
cooling down to 200 °C
With closed furnace
120
cooling down to 200 °C
Gradual opening of the furnace
0
within 35 Min down to 200 °C
Holding
time
Cooling
h : min
With closed furnace
02 : 15
cooling down to 200 °C
With closed furnace
02 : 00
cooling down to 200 °C
Gradual opening of the furnace
00 : 00
within 35 Min down to 200 °C