ASSEMBLY INSTRUCTIONS
4. Fill fountain (A) with water, making sure the pump (B)
is fully submerged. Then, plug pump power cord into
nearest outlet.
CAUTION:
Be careful not to spill water onto the plug of the pump.
DO NOT allow the pump to run dry!
CARE AND MAINTENANCE
•
Keep water clean. Using clean water will reduce mineral deposits, improve water clarity and
prolong the life of the pump.
•
Clean the fountain periodically to prevent mineral deposits and contamination. Use a wet cloth to
gently wipe heavily stained surfaces. Do not use harsh chemicals or abrasives as this will damage
the finished surface.
•
Add clean water periodically to ensure the pump is fully submerged in water.
•
Disconnect the power and empty the basin if the fountain will not be used for an extended time.
•
If installed outdoors and in a freeze-prone area of the country, ensure all water is removed and
the unit is completely dry before temperatures drop too low. This product is NOT to be operated
below 41°F or freeze damage may occur.
HOW TO REPLACE THE LED LIGHT:
1
Unscrew the preassembled ring out of
pump, and then unplug the power cord
for LED light off the pump.
Power
cord
4
2
Rotate the head of light post, and
remove it from the post to uncover the
LED light.
Lowes.com/gardentreasures
5