34
DISPLAY MESSAGES
The control panel display guides users and helps them to use the machine correctly.
The machine is warming up to brew coffee,
and dispense hot water.
The machine is ready to brew coffee and
dispense hot water.
The machine is warming up to dispense
steam.
The machine is ready to dispense steam.
The machine is brewing only one espresso.
The machine is brewing two espressos.
The machine is brewing only one coffee.
The machine is brewing two coffees.
The function for brewing ground coffee has
been selected.
Machine overtemperature. Place a container
under the pannarello/cappuccinatore and
open the steam knob. When the lights remain
on, close the knob.
Descale the machine
Fill the water tank with fresh drinking water.
Load the circuit (Starting up)
Fill the coffee bean container with coffee
beans.
Open the door, remove the dregs drawer
and empty the used coffee grinds into a
suitable container.
Important note: the dregs drawer may
be emptied only when the machine is
on. The drawer must be removed for
at least 5 seconds. If you empty the
drawer with the machine off, you will
not be able to dispense coffee the next
time you switch the machine on.
Fit the brew unit, drip tray and dregs drawer
correctly into place.
Close the front door.
Coffee grinder motor jammed.
Brew unit motor jammed.
Contact an Authorised Service Centre.