Princess 112350 Manual De Instrucciones página 12

Mounting and removing the baking
plates (fig. B)
Before you proceed, we would like you to
focus your attention on the following notes:
­ Before mounting or removing the baking
plates, make sure that the appliance is in
the 180° mode.
• To mount the baking plates:
­ Slide the baking plate (5) with the side
with two recesses (8) into the clamps (10).
­ Slightly pull the clamp (11).
­ Lower the baking plate (5) with the side
with one recess (9) into the clamp (11).
­ Release the clamp (11).
­ Repeat the above steps to mount the
other baking plate.
• To remove the baking plates:
­ Slightly pull the clamp (11).
­ Raise the baking plate (5) with the side
with one recess (9) from the clamp (11).
­ Release the clamp (11).
­ Pull the baking plate (5) with the side with
two recesses (8) from the clamps (10).
­ Repeat the above steps to remove the
other baking plate.
Use
Switching on and off (fig. A)
The appliance is equipped with a thermostat
that keeps the baking plates at the required
temperature.
• To switch on the appliance, insert the
mains plug into the wall socket.
• Turn the thermostat dial (1) to set the
required temperature. The temperature
indicator (2) remains on while the
thermostat heats the heating elements.
The temperature indicator (2) goes off
when the heating elements have reached
the required temperature.
• While the appliance is switched on, the
temperature indicator (2) will illuminate
and extinguish as the thermostat switches
the heating elements on and off to
maintain the required temperature.
• To switch off the appliance, remove the
mains plug from the wall socket.
Setting the temperature (fig. A)
• Turn the thermostat dial (1) clockwise to
increase the temperature of the baking
plates (5).
• Turn the thermostat dial (1)
counterclockwise to decrease the
temperature of the baking plates (5).
Food Temp. (°C)
Frozen food 100
Sandwiches 140
Hamburgers 190
Vegetables 190
Prawns 230
Fish 230
Sliced meat 230
Shish kebab 230
Hot dogs 230
Steak 230
Chicken legs 230
Making sandwiches (fig. A - C)
Before you proceed, we would like you to
focus your attention on the following notes:
­ Do not let metal cutlery touch the baking
plates to prevent damage to the non­stick
coating.
• Prepare the sandwich.
• Place the appliance on a stable and flat
surface.
• Make sure that the baking plates (5) are
properly mounted. If necessary, clean the
baking plates (5) with a damp cloth.
• Close the appliance (fig. C3).
• Insert the mains plug into the wall socket.
• Turn the thermostat dial (1) to set the
temperature. The temperature indicator
(2) comes on. The appliance starts heating.
• Wait until the baking plates (5) have
reached the required temperature.
The temperature indicator (2) goes off.
The appliance is ready for use.
• Open the appliance for use in the 90° mode
(fig. C1).
• Place the sandwich onto the lower baking
plate (5).
• Close the appliance (fig. C3).
12
Time (min)
­
­
3­5
5­8
5­9
5­10
4­7
6­10
6­10
6­10
5­10