Idiomas disponibles
Idiomas disponibles
The KitchenAid Commercial Blender allows you to customize your blending for any recipe you make
with the turn of a dial. For complete instructions, go online to www.kitchenaidcommercial.com.
1.
Install the back cover onto the rear of
the blender base. Ensure the tab on
the base is aligned with the opening
on the back cover.
3.
Install thumb screws on both sides of
the back cover. Tighten each thumb
screw clockwise, by hand, until secure.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
GET STARTED
QUICK START GUIDE
2.
Secure both sides of the back cover
over the tabs on the either side of the
blender base.
4.
Secure the front cover to the back cover.
5.
Attach the removable power cord and
plug into a grounded 3 prong outlet.
Flip POWER switch on the back of the
blender base to the ON (I) position.
The blender is now ready to operate.
For more detailed information about the
KitchenAid Commercial Blender, please
refer to your instructions manual.
