Alliance Laundry Systems HC18SN2 Manual Del Usuario página 10

Programming
3. Use Up or Down (arrow) key to select fill
temperature: cold (CFIL), hot (HFIL) or
warm (bFIL). Press Start (#) key.
4. Use Up or Down (arrow) key to select fill level:
low level (LOLE) or high level (HILE). Press
Start (#) key.
5. Use Up or Down (arrow) key to select supply
option. Refer to Table 2. Press Start (#) key.
Supply Options
Display
SUP0
SUP1
SUP2
SUP3
SUP4
SUP5
SUP6
SUP7
Table 2
8
Supply
No Supply
Supply 1
Supply 2
Supply 3
Supply 4
Supply 1 and 2
Supply 2 and 3
Supply 3 and 4
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
NOTE: Compartment 1 flushes with each fill.
Compartment 2 flushes when the program calls
for supply 2 during a fill. Compartment 3 flushes
when the program calls for supply 3 during a fill.
Compartment 2 does not flush when supply 4 is
called for in a program.
6. If machine is equipped with auxiliary heating
system, use Up or Down (arrow) key to select
desired segment temperature. Set value to zero to
disable auxiliary heat for this segment. Press
Start (#) key.
7. Use Up or Down (arrow) key to select spin time.
Set value to zero to skip spin step. Press Start (#)
key. Display will now show the identifier for next
program segment.
8. Press the Start (#) key to complete cycle
programming procedure.
Refer to the following Cycle Charts section for
detailed description of cycles.
F232139