Commissioning; Alignment; Sensing Range - SICK GTE6L Instrucciones De Operación

7

Commissioning

7.1

Alignment

7.2

Sensing range

8025471.1AR6 / 21.02.2021 | SICK
Subject to change without notice
Align sensor on object. Select the position so that the red emitted light beam hits the
center of the object. You must ensure that the optical opening (front screen) of the
sensor is completely clear [see
Figure 2: Alignment
Check the application conditions: Adjust the mounting position so that the sensing
range and remission capability are within the corresponding diagram [see
(x = sensing range, y = operating reserve).
During this process, an object can only be detected in front of a background if the
remission capability of the object is significantly higher than that of the background or if
the distance between the object and the background is sufficiently long.
Operating reserve
100
3
90 %
10
2
18 %
1
0
0 100 200
(3.94) (7.87)
Recommended sensing range for
the best performance
Figure 3: GTE6L
figure 2].
1
6 %
300 400 500
(11.81) (15.75) (19.69)
Distance in mm (inch)
7
COMMISSIONING
see figure 3].
9