Intended Use - Wilo CIF-Module Instrucciones De Instalación Y Funcionamiento

Intended use

CAUTION
Damage due to incorrect handling during transport and stor-
age!
Protect the device from moisture, frost and mechanical damage during transport
and temporary storage.
4 Intended use
ƒ
ƒ
DANGER
Risk of fatal electrical shock!
If used improperly, there is a risk of fatal injury due to electric shock!
• Never use the control inputs for safety functions.
• Never install the module in non-compatible devices.
4.1 Compatibility of the firmware
To ensure that the functions of the CIF module are available, the following firmware
versions (or higher) of the product in which the module is installed are required:
Pump
Wilo-Stratos MAXO
Wilo-Stratos MAXO
Wilo-Stratos MAXO
Table 1: Firmware version
NOTICE
The firmware version (SW) can be called up via the settings/device settings/device
information menu.
The firmware can be updated with the "Wilo-Assistant" app.
For compatibility with products not listed above, see
www.wilo.de/automation (German), www.wilo.com/automation (English).
Installation and operating instructions Wilo-CIF-Module
The CIF modules are designed for external control and signalling of the operating
status of Wilo pumps.
The CIF modules are not designed for safe deactivation of the pump.
Version
01002500
01032101
01042500
Comments
CIF Modbus RTU, BACnet MS/TP, LON, PLR
CIF CANopen
CIF Ethernet Multi-protocol (Modbus TCP, BACnet/IP)
en
17