en
Transport and temporary storage
dangers that can occur. Children are not allowed to play with the device. Cleaning and
user maintenance must not be carried out by children without supervision.
2.5
Safety instructions for inspection and installation work
The operator must ensure that all inspection and installation work is carried out by
authorised and qualified personnel who have also sufficiently informed themselves by
studying the installation and operating instructions in detail.
Work on the product/unit may only be carried out when the system is at a standstill.
The procedure described in the installation and operating instructions for shutting
down the product/unit must be strictly observed.
Immediately on conclusion of the work, all safety and protective devices must be put
back in position and/or recommissioned.
2.6
Unauthorised modification and manufacture of spare parts
Unauthorised modification and manufacture of spare parts will impair the safety of
the product/personnel and void the manufacturer's declarations regarding safety.
ƒ
ƒ
2.7
Improper use
The operational reliability of the supplied product is only guaranteed if used as inten-
ded and in accordance with section 4 of the installation and operating instructions.
The limit values must on no account fall below or exceed those values specified in the
catalogue/data sheet.
3
Transport and temporary storage
3.1
Scope of delivery
ƒ
ƒ
ƒ
ƒ
3.2
Transport inspection
Check delivery immediately for damage and integrity. Where necessary make a com-
plaint immediately.
16
Only carry out modifications to the product following consultation with the man-
ufacturer.
Only use original spare parts and accessories authorised by the manufacturer.
The use of other parts will absolve the manufacturer of liability for any con-
sequences arising therefrom.
CIF module
Installation and operating instructions
2 x threaded cable gland (M16x1.5)
2 x RJ45 plug AWG26...22 (field assembly without special tools) (Ethernet variant
only)
WILO SE 2020-11