Intended Use; General Safety Warnings; Electrical Safety - Ryobi RBV2800CSV Manual De Instrucciones

Ocultar thumbs Ver también para RBV2800CSV:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
Safety, performance, and dependability have
been given top priority in the design of your
electric blower or vacuum.

INTENDED USE

The product is intended only for outdoor use
in dry and well-illuminated conditions.
The product is not intended to be used by
children or persons with reduced physical,
mental, or sensory capabilities.
The product is intended for blowing or
vacuuming light debris, such as leaves, grass,
and other garden refuse. It is intended to
vacuum and mulch debris and deposit it into
the collection bag.
The product is not designed to suck in water
or other liquids.
Do not use the product for any other purpose.
WARNING
Read
all
safety
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fi re, and/or serious injury. Save all warnings
and instructions for future reference.
WARNING
Never allow children or people unfamiliar with
these instructions to use the product. Local
regulations may restrict the age of the operator.

GENERAL SAFETY WARNINGS

TRAINING
Read the instructions carefully. Be familiar
with the controls and the correct use of the
product.
Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to other people or their property.
Never use the product while tired, ill, or
under the influence of alcohol, drugs, or
medication.

ELECTRICAL SAFETY

Power plugs must match the outlet. Never
modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
warnings
and
all
Avoid body contact with earthed or
grounded
surfaces,
radiators, ranges, and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
Do not expose this product to rain or wet
conditions. Water entering the product will
increase the risk of electric shock.
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging the
power tool. Keep the cord away from heat,
oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of
electric shock.
If the supply cord is damaged, it must be
replaced by a special cord or assembly
available from the manufacturer or its
service agent.
Before every use, examine the supply cord
for damage. If there are signs of damage,
it must be replaced by a qualified person
at an authorised service centre to avoid a
hazard.
When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Using a cord that is suitable for outdoor use
reduces the risk of electric shock.
Before use, check the supply and extension
cord for signs of damage or aging. If the cord
becomes damaged during use, disconnect
the cord from the supply immediately. Do
not touch the cord before disconnecting the
supply. Do not use the product if the cord is
damaged or worn.
If you need to use an extension cord, ensure
that it is suitable for outdoor use and has a
current capacity rating sufficient to supply
your tool. The extension cord cable should
be marked with either "H05 RN F" or "H05
VV F". Check the extension cord before
every use for damage. Always uncoil the
extension cord during use because coiled
cords can overheat. Damaged extension
cords should not be repaired, they should
be replaced with an equivalent type.
Make sure that the power cord is positioned
so that it will not be stepped on, tripped
over, or otherwise subjected to damage or
stress.
Never pick up or carry the product by the
electric cable.
EN
such
as
pipes,
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
English |
1
Tabla de contenido
loading

Tabla de contenido